Welcome to Glues and Fixings

Click below for all your bearing needs

www.modelfixings.co.uk

Below are typical excellent examples of the types of modern adhesives used in modeling, however there are many more and we will be adding them to the site progressively (for more information on these adhesives click on modelfixings on the Link Page and go to adhesives)

	Syringe Pack Probably the best way to mix the correct qty's of resin and hardener. 5 minutes		Tube Pack In Stock Soon 5 minutes
			Zap-O (odourless) All the strength without the smell. Well worth the extra cost for those prone to cyano fumes 8 Seconds
	Zap-a-Gap Will fill small gaps as the name suggests. Bonds virtually any material. 20 seconds (7-10s for positioning)		Zip-Kicker Activator for ZAP and all other cyano adhesives
	Super Thin Penetrating FormulaExcellent for bonding balsa wood. 1 - 5 seconds		Slo-Zap Super thick & strong. For use on high stress areas, laminating and forming fillets. 30-40 seconds

Please note that cure times are given as a guidance only any will of course be dependant upon room temperature and the materials being bonded.

*NOTE* It is worth mentioning that although the Zip kicker is compatible with all cyno's it must only be used in conjunction with Zap Odourless on non polystyrene foam products. Andy Jarvis found out the hard way by ruining the wing to on his GWS A10.

Please note that exposure to Cyanoacrylate fumes and Epoxy Resins can be harmful - always ensure adequate ventilation, wear eye protection and gloves, and follow the guidelines on the containers.